How to Remove Rust From a Blackstone Griddle
Get surface rust off a Blackstone or any flat top griddle with oil, a scraper and a grill stone, re-season it, then keep it protected so the rust doesn’t come back.
Prep Time5 minutes mins
Active Time40 minutes mins
Total Time45 minutes mins
Yield: 1 rust-free griddle
Blackstone or flat top griddle
Metal scraper
Grill stone (pumice brick)
Paper towels or lint-free cloths
Tongs or heat-resistant gloves
Silicone griddle mat (to cover the cooled cooktop)
- High smoke point oil (avocado, canola or griddle seasoning)
Remove the rust
Warm it up. Heat the griddle on low for 3 to 5 minutes, then turn the burners off. Warm steel helps the oil work into the rust, but it shouldn’t be too hot to scrub safely.
Scrape. Hold the scraper at a low angle and scrape off loose rust, old food residue and anything flaking off the cooktop. Push the debris toward the grease trap.
Scrub with oil. Add a couple tablespoons of oil to the rusty areas and scrub with a grill stone in small circles until you see clean, gray metal. Work in sections and add a little oil as it dries out. Wear heat-resistant gloves or use a brick with a handle.
Wipe and dry. Wipe with paper towels until they come up almost clean, then run the burners on low for a few minutes to dry the steel completely. Don’t let bare spots sit, because clean steel flash rusts fast.
Re-season. Wipe on a very thin coat of oil, heat until it stops smoking, and repeat 3 to 4 times until the surface is dark and even. Thin coats bond hard. Thick coats turn sticky and flake.
Keep it from coming back
Oil after every cook. Scrape, wipe and leave a very thin coat of oil after each cook. That oil film is what keeps moisture off the steel.
Cover the cooktop. Once it’s completely cool, lay a silicone griddle mat flat on the cooktop, then add your lid or weather cover. Rust needs moisture sitting on bare steel, and the mat keeps condensation, dust and debris off your fresh seasoning.
Heavy, crusty rust? Start with a wire wheel on a drill or 60 to 80 grit sandpaper, then finish with the grill stone. Bare steel flash rusts fast, so get oil on it right away.
Orange on the paper towel? That’s rust still coming off. Keep scrubbing with oil until the towels come up gray or black.
Why rust keeps coming back: rust only needs one thing, moisture sitting on bare steel. Even under a lid, cool nights leave condensation on the cooktop, and debris traps it there. After all that work, I protect the fresh seasoning by laying a silicone mat right on the steel between cooks. Mine is the OZG Silicone Griddle Mat, and it’s the easiest way I’ve found to keep rust from coming back.
OZG and Chef Ember’s Griddle Care are run by the same team. As an Amazon Associate I earn from qualifying purchases.