Turn the heat down. Drop the burners to low right after you take the food off. Warm grease wipes right off, while cold grease hardens into a sticky layer you’ll be fighting next time.
Scrape. Hold the scraper at a low angle and push leftover food and grease into the grease trap with long, overlapping passes.
Steam the stuck bits. Squirt a little water on any stubborn spots. It sizzles and lifts the residue, so scrape again while it steams. Use small squirts, not a flood, so the steel doesn’t cool too fast.
Wipe and dry. Wipe the top with paper towels held in tongs. A light gray towel means you’re done, and a little black is normal. Leave the burners on low for a minute or two until every drop of water is gone, because water sitting on steel is how rust starts.
Oil it. Squirt on a little oil and spread it into a thin, almost dry coat over the whole top, edges included. Let it heat for a minute, then turn the burners off. Thin is the magic word: puddles of oil turn sticky.
Empty the grease cup. Once it has cooled, check the grease cup. With a foil liner you just toss the liner and pop in a new one.